This VA-06002 Disc Assembly is old stock, but it is new and unused.

View more of our range of genuine parts here.

Send us an email if you would like more information

The post VA-06002 Disc Assembly appeared first on DA Forgie Limavady Lisburn.

This T276 Disc Assembly is old stock, however it is brand new and unused.

View more of our range of genuine parts here.

Send us an email if you would like more information.

The post T276 Disc Assembly appeared first on DA Forgie Limavady Lisburn.

This Disc Assembly – 813977 is old stock, however it is new and unused.

View more of our range of genuine parts here.

Send us an email if you would like more information.

The post Disc Assembly – 813977 appeared first on DA Forgie Limavady Lisburn.

This Case Combine Disc – CA-1994769C1 is suitable for the Case 1660 series. This is old stock, however it is new and unused.

View more of our range of genuine parts here.

Send us an email if you would like more information.

The post Case Combine Disc – CA-1994769C1 appeared first on DA Forgie Limavady Lisburn.

The Kubota DM4000 disc mowers are characterized by excellent cutting performance and ground following ability in all terrain. The design does not require a flexible front linkage, as the movement is built into the machine. Eight counter-rotating discs ensure that cutting quality remains outstanding, encouraging rapid regrowth from clean stubbles. This is the perfect machine for daily grazing in combination with a loader wagon, joined up with a rear mounted machine, or as part of a butterfly combination.

Built for any terrain

With a working width of 2.8-3.2m and an operating weight of only 670-710kg, DM4028 and DM4032 require as little as 45 hp to operate. Run in a combination with a 4.0m on the rear, would give you a mowing combination capable of effortlessly handling up to 6.8m crop.

Responsive mowing

The very responsive kinematics associated with the headstock design will step in when encountering even the smallest obstacles during operation. To offer maximum protection and lessen the shock loads on the complete machine, the cutterbar will move backwards and up, letting any obstacle pass without risk of damage.

Excellent serviceability

DM4000 series has outstanding service access to the cutterbar, which is an advantage compared to most other machines with a flexible suspension. Even when the machine is raised, you can open the entire front cover.

Two-speed driveline

Standard PTO speed is 1000 rpm. However by simply switching driveline pulleys, 750 rpm for reduced fuel consumption can be achieved. This makes it possible to maintain the correct PTO speed, but using reduced engine revs, creating an opportunity for lower fuel consumption. An innovative solution solving the problem of front PTO systems not offering an economy speed.

Key Features:

• 2.8-3.2m working width.
• BreakAway solution.
• Flexible swath width.
• 750/1000 rpm gearbox.
• Excellent ground adaptation.
• Fully welded Kubota cutterbar with triangular discs.

Technical specifications

Want To See More?

For more information on the Kubota DM4000 Disc Mowers series, click here.

Click here to see the rest of the range of Kubota disc mowers.

The post Kubota DM4000 Disc Mowers appeared first on DA Forgie Limavady Lisburn.

Mow 8.70m with only 140 hp

The Kubota DM3087-DM3095 disc mowers are an eco-friendly, energy saving solution purposely build for low operating costs in terms of power and fuel consumption, with power requirements starting at only 140 hp. The low weight of only 1327 and 1500kg respectively, together with the ideal weight distribution that butterfly combinations offer, gives the optimum combination of low power requirements, low weight and high efficiency.

Designed to match the needs of large-scale mowing, DM3087 and DM3095 is packed with features to meet these demands. The centre suspended mowing units in combination with the three-bladed discs offer an unmatched mowing performance. The Kubota NonStop BreakAway solution protects the cutterbar from foreign obstacles, and automatically returns the mowing unit to working position. The Kubota cutterbar offers smooth operation with very low noise level, convenient during a long working day.

Parking, safe and sure-footed

With the new parking device, storage of the DM3087-DM3095 is made easy and convenient, requiring a minimum of space during winter storage. The DM3087-DM3095 is firmly parked on a strong and stable parking foot, bringing total height below 4m.

Work smarter on the go

This feature provides easy and simple setting of ground pressure on the DM3087 and DM3095. For greater operator comfort, the ground pressure of the spring is set hydraulically from the tractor cab. Easy to adjust, even on the go. It is in fact a very simple and clever solution to an important challenge in optimizing the mowing job. On the hydraulic version the tension on the large suspension spring, which controls the ground pressure, is adjusted hydraulically, to increase or lower pressure. The chosen ground pressure level is conveniently registered from the easy-to read scale.

DM3087-DM3095 can be adjusted for optimal operation according to different circumstances, such as field contours or working width of the front mounted mower.

Two mounting options

To ensure optimal overlap between front and rear units, the mowing units can be mounted in two positions on the suspension arm. This also gives you an option of wider overlap in hilly conditions, lessening the need for SideShift equipment.

Vertical transport position

For transport the mower folds into a compact position well behind the tractor. The folding design ensures that the weight is distributed evenly, with the weight of the mower close to the tractor. Endguards are foldable to further limiting transport height, which is below 4.0m and transport width is limited to 3.0m.

Centre suspension

The mowing units are centre suspended offering an even weight distribution across the complete mower width. Faster and more precise adaptation to ground contours is also achieved due to the centre suspended design. The benefit is less skid wear and optimum protection of the stubble.

NonStop BreakAway system

The Kubota NonStop BreakAway system protects the cutterbar from foreign obstacles. If hitting an obstacle, the BreakAway system will swing the machine backwards and over the obstacle, automatically returning the mower to working position, once the obstacle has been passed.

Excellent ground adaptation

DM3087-DM3095 is fitted with two adjustable ground pressure springs, making setting of the best possible ground pressure easily done, to match the needs of each specific mowing operation.

Headland turns

When turning on headlands the hydraulic cylinder, which is also used when going into transport position, ensures ample clearance to the swath, so they remain undamaged.

Key Features:

• 8.7-9.5m working width
• Operated by tractors starting from 140hp
• Low weight – low power requirements
• Centre Suspension
• NonStop BreakAway
• Vertical transport position
• Fully welded Kubota cutterbar with triangular discs

Technical specifications

The post Kubota DM3087-DM3095 Disc Mowers appeared first on DA Forgie Limavady Lisburn.

The Kubota DM3000 disc mowers series range boasts an extensive working range of 2.8-4.0m, with corresponding weights ranging from 810-940 kg, which means the machines can be operated with tractors starting from only 50 hp, making these very attractive machines for farmers with smaller tractors, who still needs to cut substantial areas. Paired with the DM4032 front mounted machine the joint working width is up to an amazing 6.8m.

For greater operator comfort, ground pressure of the large suspension spring is set hydraulically from the tractor cab. On the hydraulic version the tension on the large suspension spring, which controls the ground pressure, is adjusted hydraulically, to increase or lower pressure.

Centre pivot suspension

The DM3000 series is centre suspended to give an even weight distribution across the complete mower width. Faster and more precise adaptation to ground contours is also achieved because of the centre suspended design. The benefit is less skid wear and optimum protection of the stubble.

Clean cutting performance

The latest generation of the Kubota cutterbar is fitted to these machines, offering unmatched cutting performance thanks to the triangular three-bladed discs. The large compensating spring in combination with the centre mounted design provides perfect flotation of the complete cutterbar.

Work smarter on the go

This feature provides easy and simple setting of ground pressure on the Kubota DM3000 series. For greater operator comfort ground pressure of the large suspension spring is set hydraulically from the tractor cab. Easy to adjust, even on the go. It is in fact a very simple and clever solution to an important challenge in optimizing the mowing job. On the hydraulic version the tension on the large suspension spring, which controls the ground pressure, is adjusted hydraulically, to increase or lower pressure. The chosen ground pressure level is conveniently registered from the easy-to-read scale.

Accurate setting of ground pressure adds to significantly better working result and reduction of fuel consumption, as a mower with correct ground pressure is easier to pull, requiring less power and fuel.

Amazingly uncomplicated

The linkage pins on DM3000 series can be adjusted for four different positions, ensuring compatibility with any tractor. Another advantage is that the overlap in combination with a front mounted machine like DM4028 or DM4032 can be optimized, to ensure that the complete working width on both machines is utilized. Furthermore the mowing unit can be mounted in two different positions on the suspension for easy setting of optimal overlap.Vertical transport position

These DM3000 series machines are folded hydraulically into a vertical transport position up to 125° depending on model. The low gravity point ensures excellent weight distribution, with the weight of the mower close to the tractor.

NonStop BreakAway system

To offer maximum protection of the cutterbar, DM3000 series machines are fitted with the Kubota NonStop BreakAway solution. When encountering an obstacle the BreakAway will swing the machine backwards and over the obstacle, returning to its original working position, once the obstacle has been passed.

Adjustable PTO speed

Kubota DM3000 series come factory fitted with the option of being operated with either 540 or 1000 rpm. It requires no additional accessory. All that is needed is simply to turn the main gearbox on the suspension 180°.

Lift on headlands

Lifting on headlands is easily done without activating the 3-point linkage of the tractor. A hydraulic cylinder is used for lifting on headlands and turning is simple thanks to sufficient ground clearance. The same cylinder is used when going into transport position.

Key Features:

• 2.8-3.2-3.5-4.0m working width
• Centre suspension
• Up to 125° vertical transport
  solution
• NonStop BreakAway
• 540/1000 rpm gearbox
• Fully welded Kubota cutterbar
  with triangular discs

Technical specifications

Want To See More?

For more information on the Kubota DM3000 Disc Mowers series, click here.

Click here to see the rest of the range of Kubota disc mowers.

The post Kubota DM3000 Disc Mowers appeared first on DA Forgie Limavady Lisburn.

Side mounted plain disc mowers with working angles of up to 35°, these Kubota DM2000 disc mowers are offered in working widths of 2.4, 2.8 and 3.2m. Featuring the Kubota cutterbar with triangular discs, continuous and excellent cutting performance, especially in difficult crop conditions, is ensured.

Powerful drive

The mowers are equipped with a powerful and flexible spring loaded V-belt drive. As the belt loosens, the spring pushes the drive wheel outwards, automatically tensioning the belt.

Flexible suspension

Kubota DM2000 models offer a very flexible suspension, ensuring optimal ground contour following. Due to the flexible suspension, the mowers are exceptionally well suited for work on slopes and in hilly conditions, with an operating angle of 35° up and down.

Key Features:

• 2.4-2.8-3.2m working width.
• Mowing on slopes +/- 35°.
• NonStop BreakAway.
• Spring loaded V-belt drive.
• Easy setting of ground pressure.
• Fully welded Kubota cutterbar with triangular discs.

Technical specifications

The post Kubota DM2000 Disc Mowers appeared first on DA Forgie Limavady Lisburn.