The Kubota DM3000 disc mowers series range boasts an extensive working range of 2.8-4.0m, with corresponding weights ranging from 810-940 kg, which means the machines can be operated with tractors starting from only 50 hp, making these very attractive machines for farmers with smaller tractors, who still needs to cut substantial areas. Paired with the DM4032 front mounted machine the joint working width is up to an amazing 6.8m.

For greater operator comfort, ground pressure of the large suspension spring is set hydraulically from the tractor cab. On the hydraulic version the tension on the large suspension spring, which controls the ground pressure, is adjusted hydraulically, to increase or lower pressure.

Centre pivot suspension

The DM3000 series is centre suspended to give an even weight distribution across the complete mower width. Faster and more precise adaptation to ground contours is also achieved because of the centre suspended design. The benefit is less skid wear and optimum protection of the stubble.

Clean cutting performance

The latest generation of the Kubota cutterbar is fitted to these machines, offering unmatched cutting performance thanks to the triangular three-bladed discs. The large compensating spring in combination with the centre mounted design provides perfect flotation of the complete cutterbar.

Work smarter on the go

This feature provides easy and simple setting of ground pressure on the Kubota DM3000 series. For greater operator comfort ground pressure of the large suspension spring is set hydraulically from the tractor cab. Easy to adjust, even on the go. It is in fact a very simple and clever solution to an important challenge in optimizing the mowing job. On the hydraulic version the tension on the large suspension spring, which controls the ground pressure, is adjusted hydraulically, to increase or lower pressure. The chosen ground pressure level is conveniently registered from the easy-to-read scale.

Accurate setting of ground pressure adds to significantly better working result and reduction of fuel consumption, as a mower with correct ground pressure is easier to pull, requiring less power and fuel.

Amazingly uncomplicated

The linkage pins on DM3000 series can be adjusted for four different positions, ensuring compatibility with any tractor. Another advantage is that the overlap in combination with a front mounted machine like DM4028 or DM4032 can be optimized, to ensure that the complete working width on both machines is utilized. Furthermore the mowing unit can be mounted in two different positions on the suspension for easy setting of optimal overlap.Vertical transport position

These DM3000 series machines are folded hydraulically into a vertical transport position up to 125° depending on model. The low gravity point ensures excellent weight distribution, with the weight of the mower close to the tractor.

NonStop BreakAway system

To offer maximum protection of the cutterbar, DM3000 series machines are fitted with the Kubota NonStop BreakAway solution. When encountering an obstacle the BreakAway will swing the machine backwards and over the obstacle, returning to its original working position, once the obstacle has been passed.

Adjustable PTO speed

Kubota DM3000 series come factory fitted with the option of being operated with either 540 or 1000 rpm. It requires no additional accessory. All that is needed is simply to turn the main gearbox on the suspension 180°.

Lift on headlands

Lifting on headlands is easily done without activating the 3-point linkage of the tractor. A hydraulic cylinder is used for lifting on headlands and turning is simple thanks to sufficient ground clearance. The same cylinder is used when going into transport position.

Key Features:

• 2.8-3.2-3.5-4.0m working width
• Centre suspension
• Up to 125° vertical transport
  solution
• NonStop BreakAway
• 540/1000 rpm gearbox
• Fully welded Kubota cutterbar
  with triangular discs

Technical specifications

Want To See More?

For more information on the Kubota DM3000 Disc Mowers series, click here.

Click here to see the rest of the range of Kubota disc mowers.

The post Kubota DM3000 Disc Mowers appeared first on DA Forgie Limavady Lisburn.

Side mounted plain disc mowers with working angles of up to 35°, these Kubota DM2000 disc mowers are offered in working widths of 2.4, 2.8 and 3.2m. Featuring the Kubota cutterbar with triangular discs, continuous and excellent cutting performance, especially in difficult crop conditions, is ensured.

Powerful drive

The mowers are equipped with a powerful and flexible spring loaded V-belt drive. As the belt loosens, the spring pushes the drive wheel outwards, automatically tensioning the belt.

Flexible suspension

Kubota DM2000 models offer a very flexible suspension, ensuring optimal ground contour following. Due to the flexible suspension, the mowers are exceptionally well suited for work on slopes and in hilly conditions, with an operating angle of 35° up and down.

Key Features:

• 2.4-2.8-3.2m working width.
• Mowing on slopes +/- 35°.
• NonStop BreakAway.
• Spring loaded V-belt drive.
• Easy setting of ground pressure.
• Fully welded Kubota cutterbar with triangular discs.

Technical specifications

The post Kubota DM2000 Disc Mowers appeared first on DA Forgie Limavady Lisburn.