Select Page
Stihl-lawn-garden-sales-da-forgie-northern-ireland-petrol-chainsaw-ms-241-c-m-1
Stihl-lawn-garden-sales-da-forgie-northern-ireland-petrol-chainsaw-ms-241-c-m-2
Stihl-lawn-garden-sales-da-forgie-northern-ireland-petrol-chainsaw-ms-241-c-m-4
Stihl-lawn-garden-sales-da-forgie-northern-ireland-petrol-chainsaw-ms-241-c-m-5
Stihl-lawn-garden-sales-da-forgie-northern-ireland-petrol-chainsaw-ms-241-c-m-3
Stihl-lawn-garden-sales-da-forgie-northern-ireland-petrol-chainsaw-ms-241-c-m-1
Stihl-lawn-garden-sales-da-forgie-northern-ireland-petrol-chainsaw-ms-241-c-m-2
Stihl-lawn-garden-sales-da-forgie-northern-ireland-petrol-chainsaw-ms-241-c-m-4
Stihl-lawn-garden-sales-da-forgie-northern-ireland-petrol-chainsaw-ms-241-c-m-5

Excellent for harvesting thin wood, with more powerful engine performance at a low weight. With M-Tronic as standard. Long-life air filter system with HD2 filter requires only occasional cleaning, captive nut on the sprocket cover, economical 2-MIX engine,3/8″ PS saw chain for very high cutting performance.

Price -

Description

Long-life air filter system with HD2 filter The STIHL MS 261 will win you over with a filter life that is five times longer than that of the MS 260. It is equipped with a long-life air filter system that removes coarse dirt particles by pre-separation. The new HD2 filter made from polyethylene filter material filters out the finest dust particles and is easy to clean. The PET-covered round filter cartridge can be replaced quickly and without tools. The radial seal minimises the amount of dirt in the carburettor. (similar to illustration) Decompression valve The decompression valve is part of the easy starting system. The valve should be pressed before starting to reduce the compression pressure when starting, as well as reducing the effort needed to pull the starter rope. The decompression valve is semi-automatic; it must be pressed manually before starting, but then closes automatically. Combi lever As M-Tronic has electronic cold and warm start recognition, only one start position is needed on the combi lever. The exact amount of fuel is supplied on demand. You do not need to know about the status of your chainsaw and can apply full throttle straight away – even with a cold start. Because the saw is warmed up by optimum acceleration in a few seconds. STIHL M-Tronic (M) This fully electronic engine management system adjusts ignition timing and fuel metering in all operating modes. It also takes external conditions such as temperature, altitude and fuel quality into account. It ensures consistent engine performance, a constant maximum speed and superb acceleration. M-Tronic makes manual carburettor adjustments unnecessary. Thanks to electronic cold/warm start recognition, now there is only one start position on the combi-lever. The engine starts after fewer pulls and with no change of position, and can immediately accelerate up to speed – even after a cold start. M-Tronic also remembers the settings from the last time the tool was used. So when external conditions are the same, optimal engine performance is available every time you start up again. Advanced combustion technology Four overflow channels swirl the fuel-air mix before ignition, allowing for optimum combustion and highly efficient performance. The result is lower fuel consumption and high torque across a broad rpm range.
Do NOT follow this link or you will be banned from the site!
DA FORGIE
image

Limavady Office

Lisburn Office