• Sold new in 2020 By ourselves
• 8 star
• Anti wrap plates on wheels
• Lights
• Hydraulic headland lifting
• Tine savers
• Farmer owned
• Absolutely immaculate condition

The post 2019 Kverneland 8590 Tedder appeared first on DA Forgie Limavady Lisburn.

The Kubota M6002 Series Tractor Includes The Following Models:

The post Kubota M6002 Series Tractor appeared first on DA Forgie Limavady Lisburn.

This Hogg Tandem Maxi Lowloader Trailer has a 18ft bed + 5ft beaver with a 19-ton payload.

Hogg Engineering’s low loaders can be manufactured either as tandem or tri axle, they also come in a range of different lengths and with varying payloads weights.

Standard Specifications:

• 19 Ton Tandem Axle
• 18ft Bed + 5ft Beaver
• Hydraulic Brakes
• 8 Stud Axles
• 17.5 Doubles / Mini Super Singles
• Sprung Drawbar
• Hydraulic Ramps

Optional Extras:

• Bale wedge
• Bale rack
• 500’s or Super Singles
• 8 Stud Axle
• 6mm or 10mm Floor

Download Specification

View the full range of Hogg trailers

Hogg Engineering staff March 2019

The post Hogg Tandem Maxi Lowloader Trailer appeared first on DA Forgie Limavady Lisburn.

The Merlo TF65.9 TCS-170-HF has a maximum capacity of 6,500kg and top lifting height of 8.8m. This range is equipped with a powerful FPT turbo diesel engine, 4.5 litres and 4 cylinders, from 125 kW to 170 hp, STAGE V compliant and equipped with DPF and SCR system.

Eco Power Drive (EPD) that automatically control and adjust the engine revolutions based on operating conditions. As a result, the engine speed is disconnected from the accelerator pedal. This technology achieves a reduction in fuel consumption of 18%. This range comes as standard with the improved EPD TOP, offering the following modes: Heavy Loads, Eco and Speed Control.

• • “Eco” mode optimises performance during light operations, reducing consumption;
  • “Speed Control” mode allows you to set and maintain the driving speed in relation to joystick movements in order to increase hydraulic performance on demand;
  •  “Heavy Load” function, on the other hand, allows the machine’s full potential to be exploited in the most demanding contexts, delivering more power to the machine.

New HF Hydraulic System

The new hydraulic system, called HF – High Flow – features a variable displacement pump, capable of delivering a maximum flow rate of 160 l/min, combined with an electronically controlled distributor, mounted at the rear of the frame – Flow Sharing – which integrates new characteristics to benefit the machine versatility and ease of use. This means:

• • • Descent by gravity: a new solution that drastically reduces machine consumption during working and pick and carry cycles.
    • Service oil continuous delivery: module integrated in the distributor to simplify implementation and adjustment during use, managing the oil flow rate at the hydraulic outlet precisely.
    • Automated “Set Point” movements: a new function that allows you to memorise the position of the boom and implement and automate the return to the memorised position simply by pressing a button
    • “Cartesian” automated movements: possibility of making movements that follow Cartesian directives (perfectly vertical movement of the load) with a single movement of the joystick
    • Floating movements: activation of the floating mode of the boom, thanks to which, once it is resting on the ground, it will be free to follow the ground movements. Ideal for working with cleaning brushes, snow blade, etc.

Cab Suspension

The TF65.9 comes with standard Cab Suspension. The exclusive patented and dampened CS with active hydropneumatic suspension, can be switched off directly by the operator. The low frequency system allows the drastic reduction of vibrations inside the passenger compartment and facilitates the absorption of the stress and vibrations transmitted during the transfer and work phases, even on rough grounds. The cab is also FOPS (level II) and ROPS certificated, ensuring the highest level of safety for the operator.

ASCS SYSTEM

The TF65.9 is equipped with the new ASCS system (Adaptive Stability Control System) provided with a 10.1” colour screen: this allows to display the capacity diagram, updated in real time, according to the operating conditions (load handled, implement in use, stability index). This tool also allows:

• • setting and managing the geometric limits of machine use;
  • setting and adjusting the maximum speed of hydraulic movements
  • detecting and storing the amount of loads handled

Capacitive Electronic Joystick

The user interface is completed with the capacitive electronic joystick control with vertical handle. This solution allows operating in total safety and simplicity, activating the boom movements only by gripping the control with the hand.

Frame Levelling Control

The whole range can counts on the standard Frame Levelling Control that, integrated into the chassis, allows the operator to offset the ground slopes to work in total safety. On sloping terrain this machine can correct the lateral inclination by 8%, permitting the boom to be moved out perpendicularly to work in conditions of maximum efficiency and safety.

ZM3-type carriage

The carriage rotation kinematics has been redesigned to increase the drawing off force. As standard, this machine is equipped with the hydraulic implement clamping device. In addition, there is a double-acting hydraulic outlet on the nose.

Boom Suspension, Tractor Approval, Pick Up Hitch, Hydraulic trailer braking, LED lights on cab and roof wiper as standard.

Key Features:

• Engine: FPT 4.5 125kW/ 170hp
• Transmission: Hydrostatic
• Hydraulic system: Load Sensing + Flow Sharing 160 l/m 250 Bar
• Capacitive Electronic Joystick

Want to see more like the Merlo TF65.9 TCS-170-HF?

Click here to see Merlo’s range of agricultural telehandlers.

View their brochure for more information.

The post Merlo TF65.9 TCS-170-HF appeared first on DA Forgie Limavady Lisburn.

The OPICO 795QF 18 ton gas grain dryer has taken the successful 595 series & added that extra power and space to get more out of the working day. Now the 795 series gives you 18 tonnes holding capacity, 50% more than the 500 series. *With the new larger plenum it gives you 7.5 tons per hour throughput at 5% moisture reduction.

GT Dryers use Liquid Propane Gas fuel for drying heat. A tank or a group of bottles are needed to supply the dryer with liquid gas which is vaporised within the dryer and supplied to the burner ring. This provides a very clean, easily controllable and even heat which is cost effective and means that the burner requires minimal operator input and minimal servicing. When drying malting barley and milling crops many owners prefer Gas as a fuel for its guaranteed cleanliness and efficiency.

Some of the major benefits you can expect from an OPICO GT portable batch dryer:

• Easy installation
• Minimal management required
• Run on clean LP gas
• Require minimal service
• Full range of models available
• Improved presentation of grain through the polishing effect of the recirculation
• Improved hectolitre weight through cleaning action of the built in grain cleaner
• Loading at ground level, discharge from the top
• Grain is dried consistently throughout the batch
• Maintain high resale values

Efficient Clean Drying

The gas is piped into the burner unit in liquid form and passes through a vaporising ring before being burnt in a ring burner, as liquid gas expands 100 times to become vapour this ensures high temperatures can be attained easily. As gas burns very cleanly, apart from long term servicing, little input is required by the operator.

Operator Guidance and Self Diagnostics (395QF, 595QF, 600QF, 795QF, 800QF Models ONLY)

Models with the Grain Guard fitted benefit from a menu system which guides the operator through setting his dryer up for a particular mode of operation and for specific crops with example temperatures preset into the controller. The Grain Guard also has a diagnostic function which controls the fail safes and will highlight the problem if there is one.

Longevity

The outer screens on GT dryers are covered in an Epoxy coating to prevent corrosion and prolong the life of the dryer

Quiet for Sensitive Areas (QF Models ONLY)

QF Models use a large custom built centrifugal fan to create the airflow required to dry with, as the fan blades do not cut through the air aggressively this produces less noise resulting in a decibel rating of 74 and the ability to work 24 hours a day in noise sensitive areas.

Want to see more?

For more information on the OPICO 795QF 18 Ton Gas Grain Dryer, read their brochure.

View the rest of OPICO’s grain dryer range here.

The post OPICO 795QF 18 Ton Gas Grain Dryer appeared first on DA Forgie Limavady Lisburn.

Easy to install and relocate when necessary, this OPICO 595QF 12 ton Grain Dryer does not require vast expenditure on handling equipment, and their Gas Grain Dryers range can easily dry up to 168 tons per day automatically, with minimal supervision. Using gas with 3 phase or PTO drive OPICO dryers recirculate the grain constantly to dry thoroughly and consistently whilst improving hectolitre weights and augmenting quality.

GT Dryers use Liquid Propane Gas fuel for drying heat. A tank or a group of bottles are needed to supply the dryer with liquid gas which is vaporised within the dryer and supplied to the burner ring. This provides a very clean, easily controllable and even heat which is cost effective and means that the burner requires minimal operator input and minimal servicing. When drying malting barley and milling crops many owners prefer Gas as a fuel for its guaranteed cleanliness and efficiency.

Some of the major benefits you can expect from an OPICO GT portable batch dryer:

• Easy installation
• Minimal management required
• Run on clean LP gas
• Require minimal service
• Full range of models available
• Improved presentation of grain through the polishing effect of the recirculation
• Improved hectolitre weight through cleaning action of the built in grain cleaner
• Loading at ground level, discharge from the top
• Grain is dried consistently throughout the batch
• Maintain high resale values

Efficient Clean Drying

The gas is piped into the burner unit in liquid form and passes through a vaporising ring before being burnt in a ring burner, as liquid gas expands 100 times to become vapour this ensures high temperatures can be attained easily. As gas burns very cleanly, apart from long term servicing, little input is required by the operator.

Operator Guidance and Self Diagnostics (395QF, 595QF, 600QF, 795QF, 800QF Models ONLY)

Models with the Grain Guard fitted benefit from a menu system which guides the operator through setting his dryer up for a particular mode of operation and for specific crops with example temperatures preset into the controller. The Grain Guard also has a diagnostic function which controls the fail safes and will highlight the problem if there is one.

Longevity

The outer screens on GT dryers are covered in an Epoxy coating to prevent corrosion and prolong the life of the dryer

Quiet for Sensitive Areas (QF Models ONLY)

QF Models use a large custom built centrifugal fan to create the airflow required to dry with, as the fan blades do not cut through the air aggressively this produces less noise resulting in a decibel rating of 74 and the ability to work 24 hours a day in noise sensitive areas.

Want to see more?

For more information on the OPICO 595QF 12 Ton Gas Grain Dryer, read their brochure.

View the rest of OPICO’s grain dryer range here.

The post OPICO 595QF 12 Ton Gas Grain Dryer appeared first on DA Forgie Limavady Lisburn.

Easy to install and relocate when necessary, this OPICO 575QF 12 ton Grain Dryer does not require vast expenditure on handling equipment, and their Gas Grain Dryers range can easily dry up to 168 tons per day automatically, with minimal supervision. Using gas with 3 phase or PTO drive OPICO dryers recirculate the grain constantly to dry thoroughly and consistently whilst improving hectolitre weights and augmenting quality.

GT Dryers use Liquid Propane Gas fuel for drying heat. A tank or a group of bottles are needed to supply the dryer with liquid gas which is vaporised within the dryer and supplied to the burner ring. This provides a very clean, easily controllable and even heat which is cost effective and means that the burner requires minimal operator input and minimal servicing. When drying malting barley and milling crops many owners prefer Gas as a fuel for its guaranteed cleanliness and efficiency.

Some of the major benefits you can expect from an OPICO GT portable batch dryer:

• Easy installation
• Minimal management required
• Run on clean LP gas
• Require minimal service
• Full range of models available
• Improved presentation of grain through the polishing effect of the recirculation
• Improved hectolitre weight through cleaning action of the built in grain cleaner
• Loading at ground level, discharge from the top
• Grain is dried consistently throughout the batch
• Maintain high resale values

Efficient Clean Drying

The gas is piped into the burner unit in liquid form and passes through a vaporising ring before being burnt in a ring burner, as liquid gas expands 100 times to become vapour this ensures high temperatures can be attained easily. As gas burns very cleanly, apart from long term servicing, little input is required by the operator.

Operator Guidance and Self Diagnostics (395QF, 595QF, 600QF, 795QF, 800QF Models ONLY)

Models with the Grain Guard fitted benefit from a menu system which guides the operator through setting his dryer up for a particular mode of operation and for specific crops with example temperatures preset into the controller. The Grain Guard also has a diagnostic function which controls the fail safes and will highlight the problem if there is one.

Longevity

The outer screens on GT dryers are covered in an Epoxy coating to prevent corrosion and prolong the life of the dryer

Quiet for Sensitive Areas (QF Models ONLY)

QF Models use a large custom built centrifugal fan to create the airflow required to dry with, as the fan blades do not cut through the air aggressively this produces less noise resulting in a decibel rating of 74 and the ability to work 24 hours a day in noise sensitive areas.

For more information on the OPICO 575QF 12 Ton Gas Grain Dryer, read their brochure.

View the rest of OPICO’s grain dryer range here.

The post OPICO 575QF 12 Ton Gas Grain Dryer appeared first on DA Forgie Limavady Lisburn.

Easy to install and relocate when necessary, this OPICO 395QF 9 ton Grain Dryer does not require vast expenditure on handling equipment, and their Gas Grain Dryers range can easily dry up to 168 tons per day automatically, with minimal supervision. Using gas with 3 phase or PTO drive OPICO dryers recirculate the grain constantly to dry thoroughly and consistently whilst improving hectolitre weights and augmenting quality.

GT Dryers use Liquid Propane Gas fuel for drying heat. A tank or a group of bottles are needed to supply the dryer with liquid gas which is vaporised within the dryer and supplied to the burner ring. This provides a very clean, easily controllable and even heat which is cost effective and means that the burner requires minimal operator input and minimal servicing. When drying malting barley and milling crops many owners prefer Gas as a fuel for its guaranteed cleanliness and efficiency.

Some of the major benefits you can expect from an OPICO GT portable batch dryer:

• Easy installation
• Minimal management required
• Run on clean LP gas
• Require minimal service
• Full range of models available
• Improved presentation of grain through the polishing effect of the recirculation
• Improved hectolitre weight through cleaning action of the built in grain cleaner
• Loading at ground level, discharge from the top
• Grain is dried consistently throughout the batch
• Maintain high resale values

Efficient Clean Drying

The gas is piped into the burner unit in liquid form and passes through a vaporising ring before being burnt in a ring burner, as liquid gas expands 100 times to become vapour this ensures high temperatures can be attained easily. As gas burns very cleanly, apart from long term servicing, little input is required by the operator.

Operator Guidance and Self Diagnostics (395QF, 595QF, 600QF, 795QF, 800QF Models ONLY)

Models with the Grain Guard fitted benefit from a menu system which guides the operator through setting his dryer up for a particular mode of operation and for specific crops with example temperatures preset into the controller. The Grain Guard also has a diagnostic function which controls the fail safes and will highlight the problem if there is one.

Longevity

The outer screens on GT dryers are covered in an Epoxy coating to prevent corrosion and prolong the life of the dryer

Quiet for Sensitive Areas (QF Models ONLY)

QF Models use a large custom built centrifugal fan to create the airflow required to dry with, as the fan blades do not cut through the air aggressively this produces less noise resulting in a decibel rating of 74 and the ability to work 24 hours a day in noise sensitive areas.

For more information on the OPICO 395QF 9 Ton Gas Grain Dryer, read their brochure.

View the rest of OPICO’s grain dryer range here.

The post OPICO 395QF 9 Ton Gas Grain Dryer appeared first on DA Forgie Limavady Lisburn.

This Disc Assembly – 813977 is old stock, however it is new and unused.

View more of our range of genuine parts here.

Send us an email if you would like more information.

The post Disc Assembly – 813977 appeared first on DA Forgie Limavady Lisburn.

This Kverneland Headstock Bracket – KK081776 can be used for first furrow adjustment and used on 200 headstock.

View more of our range of genuine parts here.

Send us an email if you would like more information on this part.

The post Kverneland Headstock Bracket – KK081776 appeared first on DA Forgie Limavady Lisburn.