Honda UMK 435 UE Brushcutter
Manoeuvrable, versatile and interchangable.
These brushcutters will make light work of unkempt undergrowth and hard to reach areas around the garden. With our brushcutter range, there will be no stubborn undergrowth left to hide.
You can confidently go where no other brushcutter can, with our extremely reliable 4-stroke garden tools.
Honda’s brushcutters also feature an extraordinary type of non contact bearing – so special, it is even used by the likes of NASA. These bearings are known for their resistance to dust contamination, are fantastic for high speed work but are also extremely quiet.
- Engine displacement (cc): 35
- Transmission type: Low vibration centrifugal clutch
- Shaft type: Straight
- Handle: D-Loop
- Harness: Double shoulder comfort
- Additional feature: Heavy duty transmission head
- Included: 3 tooth blade and nylon thread
HONDA UMK 435 UE BRUSHCUTTER
Access All Areas
Designed for heavy-duty work, the robust Honda UMK 435 UE Brushcutter can do any job expected of it. There are no areas that stubborn undergrowth can hide.
From The Outer Limits
Space age technology right in your own back garden.
You can boldly go where no other brushcutter can, with these extremely tough and reliable 4-stroke garden tools. They are driven by a unique six-splined drive shaft (as opposed to a traditional groove key design) for added strength, with better torque and power delivery down to the work zone.
Brushcutters feature a special type of non-contact bearing. The same as those used by NASA, these bearings are renowned for their resistance to dust contamination, and are the best for ultra high-speed work. These bearings run freely with little resistance and are extremely quiet. They last much longer than the traditional full-contact rubber seal type – which can easily become contaminated with dust, overheat and wear out sooner than you think.
Honda's Brushcutters work in a rough, harsh and dirty environment so we developed a special heavy-duty, shock-resistant transmission unit – different from the usual pressed steel type – re-machined to provide the best dust protection you can find.
A Handful Of Honda
Right from the start, these brushcutters feel extremely manoeuvrable. They can tackle any job, no matter how long, short or awkward – and with the choice of two powerful 25cc or 35cc 4-stroke engines – they're up for any challenge.
Bike Type Handle Brushcutters
These brushcutters come with the comfort harness, tap-and-go nylon head and a three-tooth blade for heavy use as standard. Adjustable handlebar gives you a better, safer grip when scything through any unwanted vegetation.
Loop Type Handle Brushcutters
Honda's loop type handle brushcutters come with the comfort harness, tap-and-go nylon head and 3-tooth blade for heavy use as standard. They’re finely balanced and provide you with sensitive control when pruning or trimming.
Bent Shaft Brushcutter
This brushcutter comes fitted with the tap-and-go nylon head. It’s light, well-balanced proportions enable you to control the unit easily as you work – so reaching really tricky spots is much easier.
If you're a gardener or a landscape gardener, there's a brushcutter that's right for you. It'll do everything you ask of it – and then some.
Easy to start with a super-light flywheel, the quiet and smooth-running 4-stroke engines are the lightest and most compact of their type – with the lowest emissions in the industry. They have a silky smooth smooth drive with an anti-vibration clutch that insulates you from any arm-tiring vibrations. So when you've finished the job, you're arms wont be too tired to lift that much needed cup of tea or coffee.
If you really want to comfortable while you work, the comfort harness fits snugly around your shoulders because it has five different settings for the best possible fit. It also has a leg guard and quick release hook holder for added safety.
A Tap On The Head
It’s so important to keep the cutter line at the right length when using the nylon head for demolishing long grass and weeds.
The Honda UMK XE Brushcutter has a semi-automatic system that supplies the cutting line feed. When the line starts to wear out, it reduces the cutting performance. So now when this happens, simply tap the head on the floor and more line is released automatically. No need to stop the engine to make the adjustment, as with other machines. We also have a metal line cutter option which lasts much longer – essential for ripping through really stubborn growth and professional jobs.
|Brushcutter Attachments||Tap & go nylon head & 3 tooth blade|
|Harness||Double shoulder comfort|
|Additional Features||Heavy duty transmission head|
|Dimensions (L x W x H) (mm)||1,870 x 384 x 258|
|Dry weight (kg)||7.3|
|Engine Displacement (cc)||35|
|Engine net power (kW/rpm)||1.0/7,000|
|Fuel tank capacity (Litres)||0.63|
|Engine oil capacity (Litres)||0.1|
|Transmission||Low vibration centrifugal clutch|
|Noise value - sound power level (dB(A))||109|
Honda's products are built better to last longer. That’s why you are offered a rock-solid warranty for domestic and professional use on our core range products, covering both parts and labour.
The warranty also maintains the same value throughout the warranty period – meaning the last day of cover is exactly the same as the first.
*Subject to domestic use and following the service schedule
Want to see more?
See more from Honda's range of lawnmowers here.
Get more information from their brochure.